Grip Bond 3 is a yellow glue made from polyvinyl acetate resin modified with aliphatic resin whose adhesion is stronger than wood itself, penetrates and binds wood in carpentry projects, for interior and exterior use. It is fast-drying which reduces the pressing time.
Apply a heavy coat of Lanco Grip Bond 3TM to both surfaces being bonded. For tight materials such as maple, brick, oak, etc.; allow 2 to 3 minutes for assembly time before pressing together. Glue coming out from the joint may make the area around the joint difficult to stain. Sanding the area with glue will help clean the surface,but, is recommended to cover those areas that are around, with tape prior the application.
Appropriate clamp pressure is essential for a successful bond. Parts must remain under a pressure of about 100 psi, which is generally adequate, except for rough or warped surfaces. Applying pressure in time periods from 15 to 30 minutes, are required for best bond.